The JACKPOD-Series Floor Mount Base is designed to vertical structures including beams, columns, tanks, walkways and concrete surfaces. The product may only be used with SKYLOTEC DAVIT arms and also all accessories must have been designed, manufactured and/or approved by SKYLOTEC. All system components must be installed, inspected, maintained and used in accordance with the manufacturer's instructions. The product may only be installed on surfaces that are capable of supporting a minimum moment of 10,000 Nm and 22.4 kN vertical load. A qualified person can perform a calculation taking into account the appropriate safety factors for the given application(s) as specified in applicable regulations. In addition, a minimum pull-out strength of 17.79 kN per fastener must be ensured or the fasteners will be specified by a structural engineer who will carry out the calculations with the appropriate safety factors. Assembly and use only by qualified person.
| Art.Nr. | JP-003-4 |
|---|---|
| GTIN | 4030281203360 |
| E-class number | 40-02-01-90 |
| Customs tariff number | 84313900 |
| Standards | CEN/TS 16415:2013,EN 795-A:2012 |
| Gross weight | 8.80 kg |
| Net weight | 8.80 kg |
| Application areas | Emergency, Roofers, Shaft, Telco energy |
| Colour | Silver |
| Usable in SEAL PAC | No |
| Anchor point type | Mobile anchor point |
| Edge approved | No |
| Fallindicator | No |
| Length lanyard | No |
| Maximum lifetime | 10 years |
| Rope access technique | No |
| Rope length | No |
| Serial number mandatory | Yes |