Here you will find an overview of all recalls, inspection calls, and quality-relevant information about SKYLOTEC products. This allows users to continue receiving full information even after the end of the recall.
2020: Precautionary inspection check SKYLOTEC climbing harness SAM 2.0
Products: All SAM 2.0 harnesses with the production date between January and April 2020
Reason: During a routine inspection, a missing structural seam was discovered on a SKYLOTEC SAM 2.0 harness.
2020: Precautionary call for inspection of the SIRIUS descender
Products: All SKYLOTEC SIRIUS descenders (A-050) manufactured before September 1.
Reason: In the case of brand-new SIRIUS abseiling devices manufactured before September 2020, a functional deviation was discovered.
2020: Information on ingredients according to Article 33 of REACH Regulation (EC) No 1907/2006
According to Article 33 of the European Chemicals Regulation REACH, the information obligation applies as soon as the concentration of the respective substance from the SVHC Candidate List (https://www.echa.europa.eu/de/candidate-list-table) in the article composed of one or more articles exceeds 0.1 weight percent per article.
You can find the products that are affected by the information obligation in this overview. Please compare the article number in the order with the article number in our overview table. You will also receive information as to which article is specifically affected and with which SVHC substance the limit value has been exceeded.
2018: SKYSAFE / SKYSAFE / SKYSAFE II / SKYSAFE III / SKYSAFE SAM / SKYSAFE DURO / SKYRIDER / RIDER 3.0 of model years 2011-2017 - Precautionary Call for Inspection Check of Via Ferrata Sets
Products: Via ferrata sets with SKYSAFE carabiner (SKYSAFE (L-0056) / SKYSAFE II (L-0156) / SKYSAFE III (L-0673) / SKYRIDER (L-0039) / RIDER 3.0 (L-0672, L-0612)), SKYSAFE SAM (L-0674) und SKYSAFE DURO (L-0675)
Reason: Scattering fracture values of the SKYSAFE carabiner
2017: BASALT / GRANIT - harness exchange campaign
Products: The harnesses GRANITE Men (GSC-0145), GRANITE Women (GSC-0146) and BASALT (GSC-0147) of batches 516608, 516609, 516644, 516761, 517152
Reason: A decorative seam on the leg straps tapes may rip open after only brief use of the harness.
2016: COBRA-buckle - Precautionary Call for Inspection Check
Products: Harnesses with COBRA buckles
Reason: Inspection check of the rivets on the buckles
2016: PEANUT I und Y- Safety check
Products: All PEANUT I and Y (HSG-021-lenghts, HSG-022-lenghts) of batches 329086-XXX.
Reason: Possible fault with the riveting
2015: H-040 - Precautionary Call for Inspection Check
Products: All products with H-040 carabiner, such as ERGOGRIP CORE S15 (L-0213, L-0249, L-0545), HERKULES RP 3 S12 (Z-GRU-L-0018, Z-GRU-L-0019), lanyards 15 mm steel insert (Z-GRU-L-0213) of the numbers 14138XX (production 2014), 15001XX (2015)
Reason: Problems occurred at the upstream supplier when locking a carabiner.
2015: BEAMTAC - Precautionary recall
Products: BEAMTAC AP-017 (batch numbers 225376 to 254052)
Reason: The screw union was found to have come loose on a BEAMTAC.