D-Bolt is to be used as a single attachment point. The D-Bolt is glued / screwed into the existing structure in a fixed position. It is tested according to EN 795/A:2012 and CEN/TS16415. Since structurally fixed anchor points / devices are no longer subject to the PPE Directive, they may no longer be CE marked. In Germany, building authority approval is mandatory for these products. In Europe, different national specifications apply to these products, and approval may be required in individual cases. In Germany, please use the DIBt approved version: AP-058-DE. It is an anchor point designed to absorb falls. The D-Bolt is powder coated and is therefore protected against corrosion.
| Art.Nr. | AP-058 |
|---|---|
| GTIN | 4030281146407 |
| E-class number | 40-02-01-90 |
| Construction height | 80 mm |
| Customs tariff number | 73269098 |
| Foot plate length | 101 mm |
| Foot plate width | 46 mm |
| Standards | ANSI Z359.18:2017,CEN/TS 16415:2013,EN 795-A:2012 |
| Diameter pillar | 0 mm |
| Gross weight | 0.63 kg |
| Hole spacing b | 0 mm |
| Hole spacing a | 0 mm |
| Net weight | 0.63 kg |
| Diameter bore | 16 mm |
| Application areas | Off Shore Industry, Telco energy, Wind energy |
| Colour | Yellow |
| Anchor point type | Stationary anchor point |
| Dimension | 101,3 x 46 x 79,8mm |
| Maximum number of persons | 3 |
| Rope access technique | Yes |
| Serial number mandatory | Yes |
| Type mounting base | Steel |