Quality

Quality

Overview of all recalls, inspection calls and quality-relevant information

Here you will find an overview of all recalls, inspection calls, and quality-relevant information about SKYLOTEC products. This allows users to continue receiving full information even after the end of the recall.

2020: Information on ingredients according to Article 33 of REACH Regulation (EC) No 1907/2006

According to Article 33 of the European Chemicals Regulation REACH, the information obligation applies as soon as the concentration of the respective substance from the SVHC Candidate List (https://www.echa.europa.eu/de/candidate-list-table) in the article composed of one or more articles exceeds 0.1 weight percent per article.

You can find the products that are affected by the information obligation in this overview. Please compare the article number in the order with the article number in our overview table. You will also receive information as to which article is specifically affected and with which SVHC substance the limit value has been exceeded.

2018: SKYSAFE / SKYSAFE / SKYSAFE II / SKYSAFE III / SKYSAFE SAM / SKYSAFE DURO / SKYRIDER / RIDER 3.0 of model years 2011-2017 - Precautionary Call for Inspection Check of Via Ferrata Sets

 

Products: Via ferrata sets with SKYSAFE carabiner (SKYSAFE (L-0056) / SKYSAFE II (L-0156) / SKYSAFE III (L-0673) / SKYRIDER (L-0039) / RIDER 3.0 (L-0672, L-0612)), SKYSAFE SAM (L-0674) und SKYSAFE DURO (L-0675)

Reason: Scattering fracture values of the SKYSAFE carabiner

ProcedurePlease follow the procedure described here. If you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].

 


 

2017: BASALT / GRANIT - harness exchange campaign

Products: The harnesses GRANITE Men (GSC-0145), GRANITE Women (GSC-0146) and BASALT (GSC-0147) of batches 516608, 516609, 516644, 516761, 517152

Reason: A decorative seam on the leg straps tapes may rip open after only brief use of the harness.

ProcedurePlease follow the procedure described here. If you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].

 


  

2016: COBRA-buckle - Precautionary Call for Inspection Check

Products: Harnesses with COBRA buckles

Reason: Inspection check of the rivets on the buckles

Procedure: Please follow the procedure described here. If you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].

 


 

2016: PEANUT I und Y- Safety check

Products: All PEANUT I and Y (HSG-021-lenghts, HSG-022-lenghts) of batches 329086-XXX.

Reason: Possible fault with the riveting

Procedure: Please follow the procedure described here. If you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].

 


2015: H-040 - Precautionary Call for Inspection Check

Products: All products with H-040 carabiner, such as ERGOGRIP CORE S15 (L-0213, L-0249, L-0545), HERKULES RP 3 S12 (Z-GRU-L-0018, Z-GRU-L-0019), lanyards 15 mm steel insert (Z-GRU-L-0213) of the numbers 14138XX (production 2014), 15001XX (2015)

Reason: Problems occurred at the upstream supplier when locking a carabiner.

Procedure: Please follow the procedure described hereIf you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].

 


2015: BEAMTAC - Precautionary recall

Products: BEAMTAC AP-017 (batch numbers 225376 to 254052)

Reason: The screw union was found to have come loose on a BEAMTAC.

Procedure: Please follow the procedure described here. If you are unsure about something or have any questions, please do not hesitate to contact us. In this case, please write to [email protected].