D-BOLT TYP 45 (AP-063-GE)
Single impact point made of stainless steel, painted yellow, for concrete ceilings for gluing in
- Single anchor point, especially for concrete substrates (dmin: 160 mm)
- The anchor rod with internal thread is attached using injection mortar (not included) (Klebanker), AK 1, approval for 3 persons
€85.00 net
€101.15 gross
Product information "D-BOLT TYP 45 (AP-063-GE)"
The single anchor point D-BOLT AP-TYP-45 has a European Technical Assessment (ETA -16/0790) and is tested and certified according to EN 795: 2012, CEN/TS 16415: 2013. It is made of stainless steel 1.4401, yellow painted and specially designed for use on concrete substrates (grade min. C20/25, dmin.=160 mm). It is fixed with an M16 anchor rod with internal thread, which is glued into the concrete with an approved injection mortar (not included). It can bear loads in all directions and can secure up to three people from falling with their PPEgA. The minimum thickness of the base is 160 mm.
- Single anchor point, especially for concrete substrates (dmin: 160 mm)
- Fixing of the anchor rod with internal thread is done by means of injection mortar (not included in delivery) (Klebanker), AK 1, approval for 3 persons
PRODUCT
-
Anchor point type
-
Application areas
-
Material
-
Maximum load
-
Maximum number of persons
-
Rope access technique
-
Thickness mounting base
-
Type mounting base
-
Usable in SEAL PAC
-
Colour
-
Construction height
-
Customs tariff number
-
Diameter bore
-
Diameter pillar
-
E-class number
-
Foot plate length
-
Foot plate width
-
Gross weight
-
Hole spacing a
-
Hole spacing b
-
Net weight
-
Standards