D-BOLT TYP 47 (AP-058)

AP-TYP-47-O

Single impact point made of steel, painted yellow, for steel, screw fastening

Single anchor point, especially for steel surfaces
Fastening with hexagon bolt M16, washer and nut (included in scope of delivery), AK 1, approval for 3 persons

€55.00 net

€65.45 gross

Product information "D-BOLT TYP 47 (AP-058)"

The single anchor point D-BOLT AP-TYP-47 is tested and certified according to EN 795, CEN/TS 16415. It is made of quenched and tempered steel 1.0503, is yellow painted and has been specially developed for use on steel substructures. The steel substructure must comply with the expected loads of min. 14 kN. It is fastened with an M16 hexagon bolt, washer and nut (included in delivery). It can be loaded in all directions and can secure up to three persons with their PPEgA against falling.
- Single anchor point, especially for steel surfaces
- Fastening with M16 hexagon bolt, washer and nut (included in delivery), AK 1, approved for 3 persons

PRODUCT

Anchor point type

Stationary anchor point
Application areas

Work on roofs and facades
Brand

SKYLOTEC
Material

Steel
Maximum load

500.00 kg
Maximum number of persons

3
Mounting type

Machine screws
Rope access technique

Yes
Type mounting base

Steel
Usable in SEAL PAC

No
Colour

Yellow
Construction height

80 mm
Customs tariff number

73269098
Diameter bore

18 mm
Diameter pillar

13 mm
E-class number

40-02-01-90
Foot plate length

101 mm
Foot plate width

46 mm
Gross weight

0.63 kg
Hole spacing a

23 mm
Hole spacing b

50 mm
Net weight

0.63 kg
Standards

CEN/TS 16415, EN 795:2012/A