EASY RESCUE is a pulley and anchorage point for evacuations of rope systems, which allows access from the rescuer via the wire rope or a suspended rescue rope section at the anchorage point. The wire rope must have a diameter between 20 and 60 mm and a maximum inclination of 50°. The opening is a double snap to increase safety during use. In addition, the light weight and good balance allow one-handed use. The high breaking load is conferred by the structure of the fastener. Furthermore, the central track roller acts as a safety roller that activates under load. The protruding sheave support allows better restriction of the wire rope. In addition, the upper anchor point allows the rope to move without interfering.
- pulley for evacuation / rescue
- suitable for wire ropes with Ø 20-60 mm and max. inclination of 50°
- opening with double snapper for greater safety
| Art.Nr. | H-278 |
|---|---|
| GTIN | 4030281007173 |
| Customs tariff number | 84251900 |
| Standards | EN 12278:2007,EN 1909:2004,EN 795:2012/B |
| Gross weight | 1.78 kg |
| Net weight | 1.78 kg |
| Material | Aluminium, Polyamide, Stainless Steel |
| Application areas | Emergency, Rescue |
| Colour | Black / Grey / Silver |
| Minimum temperature | -30 °C |
| Maximum temperature | 40 °C |
| Attachment points bottom | 1 |
| Attachment points top | 1 |
| Backstop | No |
| Bearings | Bush |
| Brand | Climbing technology |
| Dimension | 390x260mm |
| Maximum compatible rope diameter | 60.00 mm |
| Maximum lifetime | 30 years |
| Minimum tensile strength | 28.00 kN |
| Number of rolls | 2 |
| Serial number mandatory | Yes |
| Usable in SEAL PAC | Not sealable |
| Working load limit in kn | 5 kN |