Fall arrester designed for work at height and rope access work. Compliant with EN 353-2, EN 12841-A/B standards and RFU 11.075 requirements for use on inclined and horizontal surfaces over an edge (r ≥ 0.5 mm).
Main features:
- it allows the safe ascent and descent along a vertical line, instantly locking in case of a fall;
- the travel along the rope is facilitated by the shape of the adjustment lever, that is activated by the connector when pushed upward during the use;
- equipped with a two-position adjustment wheel (Rest/Go) to be used to set the mode: in the ‘Go’ position the device travels freely along the rope and it locks in case of a fall; in the ‘Rest’ position the device may be manually blocked above the user to minimize the potential fall factor;
- for the different possible configurations and the relevant work loads, please make reference to what indicated in the chart.
| Art.Nr. | H-265 |
|---|---|
| GTIN | 8057733306970 |
| E-class number | 40-02-01-90 |
| Customs tariff number | 76169990 |
| Standards | EN 12841-A:2006,EN 12841-B:2006,EN 353-2:2002,RFU CNB/P/11.075 |
| Gross weight | 0.20 kg |
| Net weight | 0.20 kg |
| Application areas | Various |
| Colour | Various |
| Minimum temperature | -30 °C |
| Maximum temperature | 40 °C |
| Usable in SEAL PAC | No |
| Brand | Climbing technology |
| Edge approved | No |
| Fallindicator | No |
| Length lanyard | No |
| Maximum lifetime | 30 years |
| Rope length | No |
| Serial number mandatory | Yes |
| Size | No |
| Useable length | No |
