The stainless steel SEKURANT® X20, specially designed for a timber / OSB panel formwork, is certified according to EN 795: 2012, type A and CEN/TS 16145: 2013, type A and has the European Technical Approval (ETA) as well as the general construction approval (abZ) of the German Institute for Building Technology (DlBt). It is used as a single anchor point for PPE and as a substructure for cable systems. The pre-assembled, bolt-on bracket is supplied ready for installation with 32 wood screws, which saves a lot of time during assembly. The lightweight and handy single anchor point is available in heights up to 1000 mm and is therefore suitable for insulation thicknesses up to 800 mm.
Single anchor point, Ø20 mm, special for wooden substrates Multifunctional: single anchor point and system support in one. Easy installation: delivered ready to install thanks to the pre-assembled bracket.
Art.Nr. | Select a model... |
---|---|
Tender text | Single anchor point on wood Product name: SECURANT® X20 TYPE 5 Material: Stainless steel 1.4301 Certifications: EN 795:2012 TYPE A and CEN/TS 16145:2013 TYPE A Approval for: 3 persons at the same time Fixing substrate: Timber formwork minimum thickness 24 mm OSB 3/4 Minimum thickness: 15 mm Diameter: 20 mm Fasteners: 32 wood screws Type of fastening: Screw-on System: Intermediate support Installation instructions: Deliver and fasten to the supporting structure according to the manufacturer's instructions. Integrate professionally into the roof structure and seal with prefabricated sealing sleeves. Installation documentation: Preparation of installation documentation in accordance with DGUV I 201-056, including numerical photo documentation and its attachment using the free SKYLOTEC DOKU APP. Handover of the documentation: Both in paper format and digitally after completion of the installation. Inspection of the roof structure: The roof structure for absorbing the forces introduced must be inspected on site. Technical building regulations must be observed. Adaptations: Technical modifications and special adaptations in accordance with the requirements of the project are possible. Use: For fastening personal fall protection equipment SKYLOTEC GmbH Im Mühlengrund 6-8 56566 Neuwied Germany +49 (0)2631 - 9680-0 [email protected] www.skylotec.com |
Application areas | Flat roof construction, Roofers |
Colour | No |
Minimum temperature | -20 °C |
Maximum temperature | 80 °C |
Minimum height | 200 mm |
Anchor point type | Stationary anchor point |
Brand | SKYLOTEC |
Max height | 1000 mm |
Maximum number of persons | 3 |
Minimum area required | 1296.00 cm² |
Mounting type | Wood construction screws |
Rope access technique | No |
Serial number mandatory | No |
Thickness mounting base | 24 mm |
Type mounting base | Wood |