Fall arrester designed for work at height and rope access work, compliant with EN 353-2 and EN 12841-A standards.
Main features:
- easy to install and uninstall at any point on the rope;
- it can be secured to the harness using a EN 362 connector or KIT 12 lanyard;
- easy travel along the rope both upwards and downwards, without manual intervention;
- it may be manually blocked on the rope to minimize the potential fall factor.
Compatibility:
- EN 12841:2006-A - to be used with ropes EN 1891-A - Ø 10,5÷11 mm;
- EN 353-2:2002 - to be used with the rope PATRON PLUS 11 or the rope PATRON 10.5.
Art.Nr. | VS-001 |
---|---|
GTIN | 8056734835977 |
Customs tariff number | 84799070 |
Standards | EN 12841-A:2006,EN 353-2:2002 |
Gross weight | 0.32 kg |
Net weight | 0.32 kg |
Application areas | Elevator construction, Facades cleaning, Flat roof construction, High Rack storage, Mobile platforms, Mobile Work Platforms, Off Shore Industry, RBA rigging, Roofers, Route construction, Scaffolding, Shaft, Steelwork, Telco energy, Various, Working in confined spaces |
Colour | Silver |
Minimum temperature | -30 °C |
Maximum temperature | 40 °C |
Brand | Climbing technology |
Edge approved | No |
Fallindicator | No |
Length lanyard | No |
Maximum compatible rope diameter | 11.00 mm |
Maximum lifetime | 30 years |
Minimum compatible rope diameter | 10.50 mm |
Rope length | No |
Serial number mandatory | Yes |
Size | No |
Usable in SEAL PAC | Not rated |
Useable length | No |
Working load limit | 140.00 kg |