D-BOLT TYP 42 (AP-058)
Single impact point made of steel, painted yellow, for concrete ceilings for gluing in
- Single anchor point, especially for concrete substrates (dmin: 170 mm)
- The anchor rod with external thread is attached using injection mortar (not included in the scope of delivery) (Klebanker), AK 1, approval for 3 persons
€69.20 Price (net)
€82.35 Price (gross)
Product information "D-BOLT TYP 42 (AP-058)"
The D-BOLT AP-TYP-42 single anchor point has been tested and certified in accordance with EN 795 and CEN/TS 16415 and has a general building authority approval (abZ) from the German Institute for Building Technology (DIBt). It is made of heat-treated steel 1.0503, has a yellow finish, and was specifically developed for use on concrete substrates (grade min. C20/25, dmin.=170 mm). It is secured using an M16 anchor rod with an external thread, which is bonded into the concrete using an approved injection mortar (not included). It can withstand loads in all directions and can protect up to three people wearing their PPE against falls. The minimum thickness of the substrate is 170 mm. - Single anchor point, specifically for concrete substrates (dmin: 170 mm) - The externally threaded anchor rod is secured using injection mortar (not included) (adhesive anchor), AK 1, approved for 3 persons
PRODUCT
-
Application areas
-
Maximum lifetime
-
Maximum load
-
Rope access technique
-
Thickness mounting base
-
Usable in SEAL PAC
-
Type mounting base
-
Mounting type
-
Min. height
-
Max height
-
Anchor point type
-
Max. number of persons
-
Minimum area required
-
Maximum area required
-
Material
-
Diameter bore
-
Diameter pillar
-
Hole spacing a
-
Hole spacing b
-
Standards
-
E-class number
-
Customs tariff number
-
Construction height
-
Foot plate length
-
Foot plate width
-
Colour
-
Net weight
-
Gross weight