D-BOLT TYP 43 (AP-058)

AP-TYP-43

Single impact point made of steel, painted yellow, for concrete ceilings for gluing in

Single anchor point, especially for concrete substrates (dmin: 160 mm)
The anchor rod with internal thread is attached using injection mortar (not included) (Klebanker), AK 1, approval for 3 persons

€65.00 net

€77.35 gross

Product information "D-BOLT TYP 43 (AP-058)"

The single anchor point D-BOLT AP-TYP-43 is tested and certified according to EN 795, CEN/TS 16415 and has a general technical approval (abZ) from the German Institute for Building Technology (DIBt). It is made of quenched and tempered steel 1.0503, is yellow painted and has been specially developed for use on concrete substrates (grade min. C20/25, dmin.=160 mm). It is fixed by means of an M16 anchor rod with internal thread, which is glued into the concrete using an approved injection mortar (not included)... It is loadable in all directions and can secure up to three persons with their PPEgA from falling. The minimum thickness of the base is 160 mm.
- Single anchor point, especially for concrete substrates (dmin: 160 mm)
- Fixing of the anchor rod with internal thread is done by means of injection mortar (not included in delivery) (Klebanker), AK 1, approval for 3 persons

PRODUCT

Anchor point type

Stationary anchor point
Application areas

Working on masts and towers, Work on roofs and facades
Material

Steel
Max height

80 mm
Maximum area required

1.07 cm2
Maximum load

500.00 kg
Maximum number of persons

3
Minimum area required

1.07 cm2
Minimum height

80 mm
Mounting type

Concrete screw
Rope access technique

Yes
Thickness mounting base

160 mm
Type mounting base

Concrete
Usable in SEAL PAC

No
Colour

Yellow
Construction height

80 mm
Customs tariff number

73269098
Diameter bore

16 mm
Diameter pillar

0 mm
E-class number

40-02-01-90
Foot plate length

101 mm
Foot plate width

46 mm
Gross weight

0.66 kg
Hole spacing a

0 mm
Hole spacing b

0 mm
Net weight

0.66 kg
Standards

CEN/TS 16415, EN 795:2012/A