D-BOLT TYP 44 (AP-063-GE)
Single impact point made of stainless steel, painted yellow, for concrete ceilings for gluing in
- Single anchor point, specifically for concrete substrates (dmin: 170 mm)
- The anchor rod with internal thread is secured using injection mortar (not included) (adhesive anchor), AK 1, approved for 3 people
€95.90 Price (net)
€114.12 Price (gross)
Product information "D-BOLT TYP 44 (AP-063-GE)"
The D-BOLT AP-TYP-44 single anchor point has a European Technical Assessment (ETA -16/0790) and was tested and certified in accordance with EN 795: 2012 and CEN/TS 16415: 2013. It is made of 1.4401 stainless steel, has a yellow finish, and was specifically developed for use on concrete substrates (grade min. C20/25, dmin.=170 mm). It is secured using an M16 anchor rod with an external thread, which is bonded into the concrete using an approved injection mortar (not included). It can withstand loads in all directions and can protect up to three people wearing their PPE against falls. The minimum thickness of the substrate is 170 mm.
- Single anchor point, specifically for concrete substrates (dmin: 170 mm)
- The anchor rod with an internal thread is secured using injection mortar (not included) (adhesive anchor), AK 1, approved for 3 people
PRODUCT
-
Maximum load
-
Rope access technique
-
Thickness mounting base
-
Usable in SEAL PAC
-
Type mounting base
-
Anchor point type
-
Max. number of persons
-
Material
-
Diameter bore
-
Diameter pillar
-
Hole spacing a
-
Hole spacing b
-
Standards
-
E-class number
-
Customs tariff number
-
Construction height
-
Foot plate length
-
Foot plate width
-
Colour
-
Net weight
-
Gross weight