D-BOLT TYP 49 ( AP-063-GPS)
Single impact point made of stainless steel, glass bead blasted, for concrete ceilings for gluing in
- Single anchor point, specifically for concrete substrates (dmin: 160 mm)
- The anchor rod with internal thread is secured using injection mortar (not included) (adhesive anchor), AK 1, approved for 3 people
€111.80 Price (net)
€133.04 Price (gross)
Product information "D-BOLT TYP 49 ( AP-063-GPS)"
The D-BOLT AP-TYP-49 single anchor point has a European Technical Assessment (ETA -16/0790) and was tested and certified in accordance with EN 795: 2012 and CEN/TS 16415: 2013. It is made of 1.4401 stainless steel, is glass bead-blasted, and was specifically developed for use on concrete substrates (grade min. C20/25, dmin.=160 mm). It is installed using an M16 anchor rod with an internal thread, which is bonded into the concrete using an approved injection mortar (not included). It can withstand loads in all directions and can secure up to three people wearing their PPE against falls from a height. The minimum thickness of the substrate is 160 mm.
- Single anchor point, specifically for concrete substrates (dmin: 160 mm)
- The internally threaded anchor rod is secured using injection mortar (not included) (adhesive anchor), AK 1, approved for 3 people
PRODUCT
-
Application areas
-
Maximum load
-
Rope access technique
-
Thickness mounting base
-
Usable in SEAL PAC
-
Type mounting base
-
Anchor point type
-
Max. number of persons
-
Material
-
Diameter bore
-
Diameter pillar
-
Hole spacing a
-
Hole spacing b
-
Standards
-
E-class number
-
Customs tariff number
-
Construction height
-
Foot plate length
-
Foot plate width
-
Colour
-
Net weight
-
Gross weight