Phase out
EASY SPEED
H-265
Catching device for working at height, EN 353-2, EN 12841-A/B, adjustment wheel, stops in the event of a fall
- Safe ascent and descent: Stops immediately in the event of a fall, enables controlled gliding on the rope
- Easy operation: adjustment wheel with two positions (Rest/Go) for flexible use, in the Go position the device glides freely, in the Rest position it is locked manually
- Reduced fall factor: Minimizes the risk through manual locking and operating mode adjustment, suitable for various workloads
Product information "EASY SPEED"
Fall arrester designed for work at height and rope access work. Compliant with EN 353-2, EN 12841-A/B standards and RFU 11.075 requirements for use on inclined and horizontal surfaces over an edge (r ≥ 0.5 mm).
Main features:
- it allows the safe ascent and descent along a vertical line, instantly locking in case of a fall;
- the travel along the rope is facilitated by the shape of the adjustment lever, that is activated by the connector when pushed upward during the use;
- equipped with a two-position adjustment wheel (Rest/Go) to be used to set the mode: in the ‘Go’ position the device travels freely along the rope and it locks in case of a fall; in the ‘Rest’ position the device may be manually blocked above the user to minimize the potential fall factor;
- for the different possible configurations and the relevant work loads, please make reference to what indicated in the chart.
PRODUCT
-
Application areas
-
Maximum lifetime
-
Usable in SEAL PAC
-
Min. temperature
-
Max. temperature
-
Material
-
Standards
-
E-class number
-
Customs tariff number
-
Colour
-
Net weight
-
Gross weight