Easy Rescue
Wire rope pulley with aluminum anchor point, for wire ropes Ø 20-60 mm and inclination up to ±50°, with double catch
- Versatile application: Suitable for wire ropes with Ø 20-60 mm and a maximum inclination of ± 50°
- Safety and comfort: Double gate opening for additional safety, light weight and good balance for one-handed operation
- High load capacity: Robust structure with high breaking load, safety pulley for extra loads and improved wire rope guide
€391.50 Price (net)
€465.88 Price (gross)
Product information "Easy Rescue"
Combined anchor and pulley for evacuation from cable cars and chair lifts, it allows evacuation by allowing rescuers to be lowered along the cable, or when the underlying terrain permits it, to allow the unloaded pulley to run down the cable to the desired position and then use it as a winch and lower anchor.
Main features:
- for use on cables Ø 20 ÷ 60 mm max and inclination ± 50° max;
- double gate opening for a higher safety during the use;
- lightweight and well balanced, it can be used with only one hand;
- high breaking strength thanks to the connector’s structure;
- safety pulley in the centre that activates in case of extra load;
- upper attachment point that allows to slide along the cable without any interference from the rope;
- side ears allowing a wider control capacity on the cable.
PRODUCT
-
Application areas
-
Backstop
-
Maximum lifetime
-
Number of rolls
-
Usable in SEAL PAC
-
Working load limit in kn
-
Min. temperature
-
Max. temperature
-
Maximum compatible rope diameter
-
Attachment points top
-
Attachment points bottom
-
Material
-
Minimum tensile strength
-
Bearings
-
Standards
-
Customs tariff number
-
Colour
-
Net weight
-
Gross weight