SEKURANT® MONO TYP 40
Stop point made of stainless steel, for concrete ceilings, for hammering in
€78.59 net
€93.52 gross
Product information "SEKURANT® MONO TYP 40"
The SEKURANT® PIN TYPE 40 is made of stainless steel, specially designed for concrete substrates (quality min. C20/25, dmin.=140 mm), has a European Technical Assessment (ETA -16/0790) and is tested and certified according to EN 795: 2012, CEN/TS 16415: 2013. It is used as a single anchor point for PPE and as a substructure for rope and rail systems, such as the SKYLINE or SKYRAIL system. In the event of a fall, a controlled, plastic deformation takes place so that the dynamic forces of the fall are optimally damped. In addition, the single anchor point has an anchor eyelet that can be rotated through 360 degrees and a fall indicator. The support is delivered ready for installation with a special expansion anchor installed, so that installation by hammering into the concrete is extremely time-saving. The anchor point is available in heights of 500 and 600 mm and is therefore suitable for insulation thicknesses of 350 - 450 mm.
- Single anchor point, Ø 20 mm, especially for hammering into concrete substrates
- Multifunctional: single anchor point and system support in one
- Fastening with expansion anchor, AK 1+2, approval for 3 persons
PRODUCT
-
Anchor point type
-
Application areas
-
Material
-
Max height
-
Maximum area required
-
Maximum number of persons
-
Minimum area required
-
Minimum height
-
Rope access technique
-
Thickness mounting base
-
Type mounting base
-
Usable in SEAL PAC
-
Colour
-
Construction height
-
Customs tariff number
-
Diameter bore
-
Diameter pillar
-
E-class number
-
Foot plate length
-
Foot plate width
-
Gross weight
-
Hole spacing a
-
Hole spacing b
-
Net weight
-
Standards