SEKURANT POINT TYP SP
Single stainless steel stop point for trapezoidal steel and sandwich panels, with self-tapping screws
€68.00 net
€80.92 gross
Product information "SEKURANT POINT TYP SP"
The stainless steel, specially designed for trapezoidal steel profiles (tmin=0.63mm, profile height: 35/207 - 200/420) or steel sandwich panels (tmin=0.5mm), the SEKURANT® POINT SP is tested and certified in accordance with EN 795: 2012, type A and CEN/TS 16415: 2013, type A. It is used as a single anchorage point for PPE and as a substructure (intermediate support) for rope systems. The pre-assembled, bolted support is supplied ready for installation with 16 stainless steel self-tapping screws, making it extremely time-saving to install from above. The lightweight, handy single anchor point is available in heights of approx. 50 mm and is therefore suitable for roof surfaces without superstructures.
- Single anchor point, especially for trapezoidal steel profiles or steel sandwich panels
- Multifunctional: single anchor point and intermediate system support in one
- Fastening: Screwed onto steel trapezoidal profiles or steel sandwich panels, AK 1&2, approval for 1 person
PRODUCT
-
Anchor point type
-
Application areas
-
Brand
-
Material
-
Maximum number of persons
-
Mounting type
-
Rope access technique
-
Type mounting base
-
Colour
-
Construction height
-
Customs tariff number
-
Diameter bore
-
Diameter pillar
-
E-class number
-
Foot plate length
-
Foot plate width
-
Gross weight
-
Hole spacing a
-
Hole spacing b
-
Net weight