The installation sleeve of the AP type-54, for holding the MOBILFIX AP-018, is installed on a steel beam at the point of use. The sleeve is tested and certified according to EN 795: 2012, CEN/TS 16415: 2013. It lies flush with the surface and is closed by the internal spring plug. This prevents the ingress of dirt and is visually inconspicuous. It is attached by means of a screw connection with a nut.
- Single anchor point, especially as an anchor point for window cleaners.
- Fastening with a nut to a steel construction, AK 1, approval for 3 persons
| Art.Nr. | AP-TYP-54 |
|---|---|
| GTIN | 4030281277606 |
| E-class number | 40-02-01-90 |
| Construction height | 0 mm |
| Customs tariff number | 73269098 |
| Foot plate length | 0 mm |
| Foot plate width | 0 mm |
| Diameter pillar | 0 mm |
| Gross weight | 0.41 kg |
| Hole spacing b | 0 mm |
| Hole spacing a | 0 mm |
| Net weight | 0.41 kg |
| Diameter bore | 24 mm |
| Application areas | Facades cleaning, lithium_ion, Roofers |
| Colour | Silver |
| Usable in SEAL PAC | No |
| Anchor point type | Stationary anchor point |
| Maximum load | 150.00 kg |
| Maximum number of persons | 3 |
| Minimum area required | 9.00 cm² |
| Rope access technique | No |
| Serial number mandatory | Yes |
| Type mounting base | Steel |