SECU®FALZ 2.0 is a temporary anchor point for the attachment of personal protective equipment against falls from a height, tested and certified according to EN 795: 2012, type A and CEN/TS 16145: 2013, type A. The system is attached to the seams of the roof covering using clamps approved by the building authorities without penetrating the roof cladding. Cold bridges and leaks are thus avoided. There are two types to choose from: Type 1: Clamp fasteners for hand seamed sheet metal roofs made of zinc, aluminum or sheet steel. Type 2: clamp fasteners for metal standing seam roofs of the brands Kalzip, Bemo, Alufalz and Rip Roof.
- Temporary anchor point for standing seam metal roofs
- Fixing by means of clamps on seams or round flanges of metal roofs
- Avoiding cold bridges
Art.Nr. | AP-FALZ-3 | ||||||||
---|---|---|---|---|---|---|---|---|---|
GTIN | 4030281027942 | ||||||||
E-class number | 40-02-01-90 | ||||||||
Construction height | 120 mm | ||||||||
Customs tariff number | 73089059 | ||||||||
Foot plate length | 400 mm | ||||||||
Foot plate width | 50 mm | ||||||||
Standards | EN 795:2012-A | ||||||||
Diameter pillar | 0 mm | ||||||||
Gross weight | 0.02 kg | ||||||||
Hole spacing b | 0 mm | ||||||||
Hole spacing a | 0 mm | ||||||||
Net weight | 0.02 kg | ||||||||
Diameter bore | 0 mm | ||||||||
Application areas | Roofers | ||||||||
Colour | Silver | ||||||||
Minimum temperature | -20 °C | ||||||||
Maximum temperature | 80 °C | ||||||||
Minimum height | 50 mm | ||||||||
Anchor point type | Mobile anchor point | ||||||||
Brand | SKYLOTEC | ||||||||
Max height | 50 mm | ||||||||
Maximum lifetime | 30 years | ||||||||
Maximum number of persons | 1 | ||||||||
Rope access technique | No | ||||||||
Serial number mandatory | No | ||||||||
Set Komponenten |
|