SECU®GREEN SOLO is an EN 795: 2012, Type A and CEN/TS 16145: 2013, Type A tested and certified anchorage point that can be used together with suitable Personal Protective Equipment against falls from a height as a fall arrest or restraint system. SECU®GREEN meets the requirements set out in the occupational health and safety building regulations and is integrated into the roof structure without penetrating the roof waterproofing. The type and thickness of the ballast is variable. It can be provided by greening, graveling or paving. Depending on the detailed planning, ballast loads from 30 kg/m2 or safety carpet sizes from 1 m2 are possible. The maximum roof pitch may be 5°.
- Single anchor point, especially for roofs with greenery, gravel, paving
- Fastening without penetrating the roof waterproofing
- The type and thickness of the ballast is variable
| Art.Nr. | AP-GREEN-SOLO |
|---|---|
| GTIN | 4030281028345 |
| E-class number | 40-02-01-90 |
| Construction height | 300 mm |
| Customs tariff number | 73089098 |
| Foot plate length | 3000 mm |
| Foot plate width | 3000 mm |
| Diameter pillar | 100 mm |
| Gross weight | 0.66 kg |
| Hole spacing b | 0 mm |
| Hole spacing a | 0 mm |
| Net weight | 0.66 kg |
| Diameter bore | 0 mm |
| Material | Polyester, Stainless Steel |
| Application areas | Flat roof construction, Roofers |
| Colour | Grey |
| Anchor point type | Mobile anchor point |
| Brand | SKYLOTEC |
| Maximum area required | 900.00 cm² |
| Maximum number of persons | 1 |
| Minimum area required | 100.00 cm² |
| Rope access technique | No |
| Serial number mandatory | No |