The MULTIPIN, MPA-TYP-12 has general building authority approval (abZ) from the German Institute for Building Technology (DIBt) and can therefore be installed as a single anchor point or system support for rope and rail systems for securing persons against falling. The supplied fasteners are part of the system and are installed in the trapezoidal steel sheet according to the installation instructions. The special features are the handy packing size and the smart base plate, which can easily be adapted to the distances of the upper chords of the trapezoidal sheet. In case of a fall, a controlled plastic deformation takes place, so that the dynamic forces of the fall are optimally damped. Anchoring of loads, use for material transport or as a safety device in rope access technology, are not the subject of the tests and are outside the scope of application. All anchor points from the MULTIPIN series have an anchor eye that can be rotated through 360 degrees and a fall indicator.
Art.Nr. | MPA-TYP-12-500 |
---|---|
GTIN | 4030281290292 |
E-class number | 40-02-01-90 |
Construction height | 500 mm |
Customs tariff number | 73089098 |
Foot plate length | 570 mm |
Foot plate width | 300 mm |
Diameter pillar | 20 mm |
Gross weight | 11.83 kg |
Hole spacing b | 235 mm |
Hole spacing a | 503 mm |
Net weight | 11.83 kg |
Diameter bore | 0 mm |
Application areas | Flat roof construction, Roofers |
Colour | Silver |
Usable in SEAL PAC | No |
Minimum height | 500 mm |
Anchor point type | Stationary anchor point |
Dimension | 500mm |
Max height | 500 mm |
Maximum area required | 2500.00 cm² |
Maximum number of persons | 3 |
Minimum area required | 2500.00 cm² |
Mounting type | Tilting dowel |
Rope access technique | No |
Serial number mandatory | Yes |
Type mounting base | Trapezoidal sheet metal |