GORDON

GORDON

PRODUCT RANGE OVERVIEW

GORDON is the all-rounder among fall arrest blocks. Its low weight and robustness are impressive features. This offers great advantages especially when working at height: the devices can be combined with various certified textile ropes which can be easily interchanged by the user. GORDON offers an endless variety of potential uses: It can be used solely as a fall arrester, and in the GORDON RESCUE version as a fall arrester and lead climbing belay device.

GORDON RESCUE can also be used in combination with other hardware as a self-locking pulley system. GORDON RESCUE is suitable for entry, lead climbing and for belaying during rescues. Its compact dimensions and milled aluminium housing make it slimline, lightweight and easy to handle. The device can be equipped with rope of any length and used in both directions. GORDON stops falls. Thanks to a built-in gauge and distinct lasermarkings wear inspection is very simple.

Standards

GORDON: EN 360:2002, ANSI Z359.14:2014
GORDON RESCUE: EN 360:2002, EN 795-B:2012, ANSI Z359.14:2014

Basic devices

HSG-020 (GORDON) HSG-020-R (GORDON RESCUE)

 

Pre-configured devices

 

These GORDON configurations are very well suited for a safe descent or controlled abseiling, for example, in high rope courses or other environments where fall arrest devices with long rope lengths over 20 meters are needed. These GORDON configurations are particularly useful as fall arrest devices for ascents as well as for descents in high ropes courses or for use in confined spaces, as endless rope movement in both directions is possible. Using a pulley (such as STANDARD ROLL) on the ground is recommended.
HSG-020 HSG-020-R HSG-020

HSG-020

+ L-0741-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets
+ L-0741-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets
+ L-0743-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets, 1 ring
+ L-0744-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets, 2 rings

 

Pulley systems

 

     
GORDON PULLEY SYSTEM 1:3
A-120-3
GORDON PULLEY SYSTEM 1:4
A-120-4
GORDON PULLEY SYSTEM 1:5
A-120-5
+ L-0741-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets
rope lenght corresponds to lifting hight times 3
+ L-0741-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets
rope lenght corresponds to lifting hight times 4
+ L-0741-Length (R-064)
Semi-static rope 10.5 mm
Sewn eyelets
rope lenght corresponds to lifting hight times 5
Contains:

  • 2x OVALOY TRI
  • 2x OVAL LINK 8 VA
  • 1x STANDARD ROLL
  • 1x STANDARD ROLL 2L
  • 1 x Lift Fix R
Contains:

  • 2x OVALOY TRI
  • 2x OVAL LINK 8 VA
  • 1x STANDARD ROLL 2L
  • 1x DOUBLE ROLL 2L
  • 1 x Lift Fix R
Contains:

  • 2x OVALOY TRI
  • 2x OVAL LINK 8 VA
  • 2x DOUBLE ROLL 2L
  • 1 x Lift Fix R

 

Inspection kits

WERK-0570-1 Inspection Kit 1: contains all screws and spacers (bolts)
WERK-0570-2 Inspection Kit 2: contains two centrifugal half housing

 

>>here you can find all products

All technical details can be found in the instructions for use.

Here you can find the product-range overview and information for the inspection as a pdf.

Wear control is very easy with GORDON. See here how you can do an inspection.