The single anchor point D-BOLT AP-TYP-42 is tested and certified according to EN 795, CEN/TS 16415 and has a general technical approval (abZ) from the German Institute for Building Technology (DIBt). It is made of quenched and tempered steel 1.0503, is yellow painted and has been specially developed for use on concrete substrates (grade min. C20/25, dmin.=170 mm). It is fixed with an M16 anchor rod with external thread, which is glued into the concrete with an approved injection mortar (not included). It can bear loads in all directions and can secure up to three people from falling with their PPEgA. The minimum thickness of the base is 170 mm.
- Single anchor point, especially for concrete substrates (dmin: 170 mm)
- Fixing of the anchor rod with external thread is done by means of injection mortar (not included in delivery) (Klebanker), AK 1, approval for 3 persons
| Art.Nr. | AP-TYP-42C |
|---|---|
| Construction height | No |
| Application areas | Off Shore Industry, Telco energy, Wind energy |
| Colour | No |
| Usable in SEAL PAC | No |
| Minimum height | 80 mm |
| Anchor point type | Stationary anchor point |
| Max height | 80 mm |
| Maximum area required | 1.07 cm² |
| Maximum lifetime | 10 years |
| Maximum load | 500.00 kg |
| Maximum number of persons | 3 |
| Minimum area required | 1.07 cm² |
| Mounting type | Concrete screw |
| Rope access technique | Yes |
| Serial number mandatory | No |
| Thickness mounting base | 170 mm |
| Type mounting base | Concrete |