Constructed of stainless steel, specifically for a wood formwork / OSB panel, SEKURANT® X20 is certified to EN 795: 2012, Type A and CEN/TS 16145: 2013, Type A. It serves as a single anchor point for PSAgA as well as a substructure for rope systems. The pre-assembled, bolt-on support comes ready to install with 32 wood screws, making installation extremely time-saving. The lightweight, handy single anchor point is available in heights up to 1000mm and is therefore suitable for insulation thicknesses up to 800mm.
.- Single stop point, Ø20mm, especially for wooden substrates.
- Multifunctional: single anchor point and system support in one.
- Easy installation: ready-to-install delivery due to pre-assembled support.
| Art.Nr. | Select a model... |
|---|---|
| Tender text | <p>Single anchor point / anchor device<br>Product name: SEKURANT X20 TYPE 5</p> <p><br>Material: Stainless steel, rustproof</p> <p>Certifications: EN 795/A:2012 and the CEN/TS 16415<br>Approval for: 3 people at the same time</p> <p><br>Usable as: Single anchor point, as system support for SEKURANT VARIO LINE and SKYLINE 2.0 cable system<br>Fixing substrate: Timber formwork (tmin=24mm), OSB3/ OSB 4 (tmin=15mm)</p> <p>Minimum component thickness: 100 mm<br>Post height: '.........' mm (optionally adjustable up to 1000 mm) for roof construction up to 850 mm<br>Footplate dimensions: 350 x 350 mm<br>Diameter: 20 mm<br>Fastening points: all-round<br>Fasteners: 32 pcs. Wood screws</p> <p><br>Installation instructions: Deliver and fasten to the supporting structure according to the manufacturer's instructions. Integrate professionally into the roof structure and seal with prefabricated sealing sleeves.<br>Installation documentation: Preparation of installation documentation in accordance with DGUV I 201-056, including numerical photo documentation and its attachment using the free SKYLOTEC DOKU APP.<br>Delivery of documentation: Both in paper format and digitally after completion of the installation.</p> <p <p><br>Testing the roof structure: The roof structure for absorbing the forces introduced must be tested on site. Technical building regulations must be observed.<br>Adaptations: Technical modifications and special adaptations in accordance with the requirements of the project are possible.<br>Use: For fastening personal fall protection equipment</p> <p>SKYLOTEC GmbH <br>Im Mühlengrund 6-8<br>56566 Neuwied<br>Germany<br>+49 (0)2631 - 9680-0<br>[email protected]</p> <p>www.skylotec.com</p> |
| Application areas | Flat roof construction, Roofers |
| Colour | No |
| Minimum temperature | -20 °C |
| Maximum temperature | 80 °C |
| Minimum height | 200 mm |
| Anchor point type | Stationary anchor point |
| Brand | SKYLOTEC |
| Max height | 1000 mm |
| Maximum number of persons | 3 |
| Minimum area required | 1296.00 cm² |
| Mounting type | Wood construction screws |
| Rope access technique | No |
| Serial number mandatory | No |
| Thickness mounting base | 24 mm |
| Type mounting base | Wood |